null

Free Shipping on orders over $100

Some Restrictions
promo

BuckleguyPLUS+ Rewards

View Program

BG Manual Clicker Press w/ Swing Head, Gray, 12-Ton

SKU:

TLCP12T
Weight:
470.000 LBS
$3,295.00

Free Shipping on orders over $100

Some Restrictions

BG Manual Clicker Press with Swing head, 12-Ton

Tonnage: 12 tons

Color: Gray

Size info:

  • Clicker surface: 12" x 23" inches - The plastic pad is replaceable.
  • Clicker head: 11.5" x 15.75"
  • Clicker arm length: 36" short arm. 52" long arm.
  • Floor to top of clicker pad: 35"
  • Total area of clicker in workspace: 24.5" (W) x 27.5" (D) x 82" or 98" (H) - (There are 2 arm length attachments so 2 total height options).

Die heights:

  • Opening height: Adjustable opening from 1/2" to 2-1/8" (inches) from top of clicker pad to bottom of clicker head.
  • Clicker pad is 3/4" thick. 
  • Dies Accepted: 1/2", 3/4", 1", 1 1/4", 1-1/2", 2" (inches)
  • The most common die heights are 1" and 1 1/4" (inches)
  • Dies larger than 2" will not fit when including the leather they sit on.
  • Any die under 1/2" may require an additional plastic pad to raise die to meet clicker head.

Uses:

  • Cutting leather, vinyl, canvas, rubber, and other soft materials.
  • Cutting large and small items such as bags, wallet, straps, gun holsters, keychains, purses, panels, coasters, and countless other accessories.
  • Embossing logos, monogramming.

Features:

  • The swivel head can rotate ~170° so you can place your cutting dies in optimal locations.
  • There are holes in base of each leg to bolt to the floor or to attach to a raised platform to increase the overall height.
  • 2 screw in lever arms. The short arm is a total of 36" and delivers 8 tons of pressure. The longer 52" arm delivers 12 tons of pressure.
  • 4 oil ports to keep clicker operating smoothly.
  • Total weight out of box ~460 lbs. Will need 3+ people to move it.
  • The hand rotating height adjuster knob is easy to use.
  • Cycle time: 2-3 second average.

Delivery and assembly:

  • The clicker press is shipped in a crated pallet and will need to be delivered by a freight truck with a lift gate. For transportation purposes the head is unattached from the leg stand. You will need 3 or more people to lift this ~400 lb clicker head onto the top of the leg stand to then be bolted in.