Renia Super-FIX Contact Cement
Renia Super-FIX is a solvent-based contact adhesive made for footwear, orthotics, leathercraft, and general workshop use. This professional-grade, high-tack formula is designed to create strong, flexible bonds across a wide range of materials commonly used in shoe repair and leatherwork. As a polychloroprene-based adhesive, Super-FIX offers aggressive initial grab, dependable bond strength, and a practical working window for accurate assembly. It is toluene-free, dries clear, and can be used for both cold bonding and heat reactivation workflows. All Renia adhesives are 100% free of Toluene and MEK.
Super-FIX Adhesive Specs:
- Available Sizes:
- Quart (32 fl oz) - Brush attached to cap
- Gallon (128 fl oz)
- Strength: High strength, flexible permanent bond
- Type: Solvent
- Open Time: Approximately 50 minutes
- Once glue is applied, open time will vary depending on temperature, humidity, and material type. If the open time is exceeded, the adhesive can be reactivated with heat.
- Color When Dry: Clear
- Effectively Bonds With:
- Leather, Rubber, EVA, TR (thermoplastic rubber), Felt, Cork, Fabric, and many common footwear materials
- Not recommended for plasticized PVC, PE, or PP.
Application Instructions:
- Prepare surfaces: Clean, dry, and free of oils, dust, or finishes. Lightly roughen smooth materials such as rubber or EVA for improved adhesion.
- Apply adhesive: Apply an even coat to both mating surfaces using a brush or roller in a well-ventilated area.
- Allow to tack: Let dry until tacky, typically about 5 to 50 minutes depending on temperature and humidity.
- Bond surfaces: Join carefully and apply firm, even pressure. Repositioning is limited once contact is made.
- Cure: Bond strength builds over time, with best results after approximately 24 hours. Heat reactivation may be used if required.
Common Uses:
- Footwear construction and repair
- Orthotic and prosthetic fabrication
- Heel and sole attachment
- Bonding leather components and panels
- Bags, belts, and structured leather goods
- General workshop assembly
Safety & Handling
- Use only in a well-ventilated area
- Follow all safety guidance on the product label and SDS
- Shipping restrictions may apply due to solvent content
- Safety Data Sheet (SDS) - CLICK HERE
Contact Adhesives vs Pressure Sensitive Adhesives (PSAs)
- Contact adhesives bond instantly when both sides are joined and are difficult to reposition afterward.
- Pressure sensitive adhesives will not bond until pressure is applied and can be repositioned until then.
Renia: Cologne, Germany (est. 1930)
Founded in 1930, Renia GmbH is an independent, family-owned adhesive manufacturer based in Cologne, Germany, now in its fourth generation. The company focuses exclusively on high-performance adhesives for footwear, leather goods, and orthotics, developed and produced in Cologne, and exported to more than 40 countries. Renia has held ISO 9001 quality management certification since 2006.
Home
